Please use this identifier to cite or link to this item: http://repository.futminna.edu.ng:8080/jspui/handle/123456789/2606
Title: Physiochemical, Mineralogical and Physical Properties of Overburden over Gneiss Basement Complex in Minna Metropolis, Nigeria
Authors: Alhaji, Mustapha Mohammed
Alhassan, Musa
Mambo, Abdulhameed Danjuma
Adejumo, Taiye Waheed
Yahaya, Abdullahi Musa
Keywords: Gneiss basement complex · Mineralogical properties · North Central Nigeria · Physiochemical properties · Physical properties · Overburden soil
Issue Date: 2020
Publisher: Proceedings of 4th International Conference on Innovations and Inter Disciplinary Solutions for Undereserved Areas, InterSol, 2020, Nairobi, Kenya
Citation: Alhaji, M. M., Alhassan M. Mambo, A. D. T. W. Adejumo and A. M. Yahaya (2020). Physiochemical, Mineralogical and Physical Properties of Overburden over Gneiss Basement Complex in Minna Metropolis, Nigeria. Proceedings of 4th International Conference on Innovations and Inter Disciplinary Solutions for Undereserved Areas, InterSol, 2020, Nairobi, Kenya, pp. 64-76.
Abstract: Soil engineers pay very little or no attention to variation in the mineralogical and consequently, the geotechnical properties of overburden with depth on basement complexes, a situation which can lead to sudden failure of civil engineering structures. Soil samples collected at depths ranging from 0.5 m to 4.0 m at 0.5 m intervals, from a trial pit dogged manually to depth of 4.0 m on an overburden over gneiss basement complex, was evaluated for physiochemical, mineralogical and physical properties. This is to determine the variation of these properties with depth within the profile of the strata. Results showed that sodium amphibolite and feldspar, which are both primary minerals dominate the overall profile of the over-burden. Carbon which dominates the lower profile of the strata was observed to alter to gregorite at upper section of the profile. Organic matter contents and cation exchange capacity reduces with increase in depth while lost on ignition and pH were relatively constant with depth. The index properties as well as natural moisture contents increases from 0.5 m to between 1.0 m to 1.5 m depth after which the values reduced to constant values at 3.0 m depth. The grain size analysis shows high composition of sand sized particles with silts of low to non-plasticity. The maximum Dry Density (MDD) values are generally relatively high and increases from 2.262 g/cm3at 0.5 m depth to 2.410 g/cm3 at 4.0 m depth while the Optimum Moisture Content (OMC) reduced from 9.8% at 0.5 m depth to 6.7% at 4.0 m depth.
URI: http://repository.futminna.edu.ng:8080/jspui/handle/123456789/2606
Appears in Collections:Civil Engineering



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.