Ismail, S. PKolo, D. NYUSUF, Abdulazeez2025-04-252024-02-28http://repository.futminna.edu.ng:4000/handle/123456789/1018Basic conventional building materials like cement and aggregates are becoming increasingly expensive due to high cost incurred in their processes, production and transportation. The utilization of locally available materials such as cassava peel ash that can either reduce or replace the conventional ones is being considered. Following review paper summarizes the mechanical and durability characteristics of cassava peel ash compared with ordinary Portland cement. The cassava peel ash was obtained by calcinations of cassava peel to 7000 c temperature. The sample was investigated using XRS-FP Analysis, for evaluating the concentration of each component such as SiO2, Al2O3, Fe2O3, CaO, MgO, SO3, K2O Na2O, LoI, the phase composition, mechanical and durability properties evolution. From this review is obvious that significant analytical techniques have been successfully carried out and a significant concentration of 81.14% was obtained. These analyses have shown that natural pozzolan based geopolymer has potential to be used as sustainable building materials. It was discovered that the cassava peel ash contains all the main chemical constituents of cement though in lower percentage compared with OPC which shows that it can serve as a suitable replacement if the right percentage is used. However, its durability and sulphuric acid resistance improved considerably at greater replacement of cement with cassava peel ash. The study recommends that concrete made with cassava peel ash can be used for light construction works where high strength is not major requirement but where durability is a major concern.enAggregateCassava Peel AshCementDurabilityPozzolanWorkabilityArticle