School of Infrastructure Process Engineering and Technology (SIPET)

Permanent URI for this communityhttp://197.211.34.35:4000/handle/123456789/27

School of Infrastructure Process Engineering and Technology (SIPET)

Browse

Start date: 2024Subject: search.filters.subject.Compressive Strength

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Effect of Partial Replacement of Cement with Cow Dung Ash Using Bida Natural Coarse Aggregate
    (School of Environmental Technology, Federal University of Technology, Minna, 0022-10-05) Abbas, B. A.; YUSUF, Abdulazeez; Kolo, D. N; Aboje, A. A.; Mahmud, M.B.; Ndaiji, A. U.
    The research investigates the effect of partial replacement of cement with cow dung ash (CDA) in concrete production using Bida natural coarse aggregate. Water to cement ratio and mix ratio of 0.6 and 1:2:4 was adopted respectively. The aggregates used were characterized and the cow dung was calcined at a temperature between 400-500oC. Concrete was produced using CDA as cement replacement at 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35% and 40%. Slump of the freshly produced concrete was determined and the compressive strength of the hardened concrete was determined at 7, 21 and 28 days of curing. The sum of SiO2, Al2O3 and Fe2O3 in CDA exceeds the 70% minimum specified by ASTMC 618-12. The slump of the fresh concrete ranges from 0 – 40 mm while the compressive strength at 28 days curing duration ranges from 12.59N/mm2 19.29N/mm2 and density was 2323.95kg/m3– 2554.59kg/m3 respectively. The test results revealed that the compressive strength decrease with increase in CDA content and increase with curing age. The strength results indicate that there was no much significant difference between the control specimen with 0% CDA and that containing 5% CDA. This implies that concrete made using CDA as partial replacement for cement can be used for structural applications such as in the construction of reinforced concrete slabs, beams, columns and foundations. The study concluded that CDA has pozzolanic properties and can be used to replace up to 10% cement in concrete produced using Bida natural coarse aggregate.
  • No Thumbnail Available
    Item
    Experimental Study on Steel fibre reinforced Natural aggregate concrete
    (Ethiopian International Journal of Engineering and Technology (EIJET), 2024-01-02) Kolo, D. N.; Graham, M.; Milad, A.
    The rising volume of pollution is a significant threat to achieving the United Nations’ goal for a sustainable society. Various approaches have been used to tackle pollution, including recycling wastes into completely new products or utilizing them to improve other materials. In this respect, this article presents the results of an experimental study conducted on waste steel fiber sourced from waste tyres in concrete production. The fibers measuring 2, 4, and 6 cm were utilized using dosages of 0.5, 1, and 1.5% by mass of cement. The natural aggregate which is a bya -a product of the Precambrian deposits of the Bida trough was utilized as coarse aggregate. Iron moulds measuring 150 x 150 x 150mm were used for concrete production and were demoulded after 24 hours and cured. The optimum 28-day compressive strength of 27.19 N/mm2 was recorded with a 4 cm fiber length and 0.5% fiber content. This represented a 36.36% gain in the 28-day compressive strength of the concrete when compared to the control.