Civil Engineering

Permanent URI for this collectionhttp://197.211.34.35:4000/handle/123456789/148

Civil Engineering

Browse

Search Results

Now showing 1 - 4 of 4
  • Item
    Adamu Hawa
    (USEP: Journal of Science and Engineering Production, 2023) kOLO, S. S.; Adeleke, O. O; Yusuf, I. T.; Abdulrahman H. S; Shehu, M.
    Five settlements in Minna, Niger State capital were examined to determine drivers` attitudes and behaviours regarding usage of seatbelts. Multiple data Collection methods consisting of semi-structured interviews to create questionnaire for an in-person survey for 100 drivers each, for five different locations that was used. The questions explored why Minna drivers used or do not use seatbelts and what they think would be the best interventions to increase the rate of seatbelt usage in Minna by drivers. The outcome of all the aforementioned were translated into charts and following outcome was obtained. The composition of gender, for the respondent are 87% male and 13% female, showing that, out of this number 33% are married while 64% are unmarried and 3% are divorced. The finding also showed that the most prevalent age of driver is between age 36 to age 45 and it is said to be the productive age. It was also discovered that majority of the driver interviewed are Nigerlite constituting 64% of those interviewed. It was also noted that, a driver is 87% safer when seat belt is used as compared to not using seatbelt of 37% safe when accident or crash happen. It was therefore advised that sustained radio and television advertisement be done to encourage the use of seatbelt in Northern Nigeria.
  • Item
    Partial Replacement of Fine Aggregate with waste Glass in Concrete made from Bida Natural Aggregate
    (. Proceedings of the 3rd International Engineering Conference, Federal University of Technology Minna, Nigeria, 2019-02-05) Alhaji, B.; Kolo, D. N.; Abubakar M.; Yusuf A.; Abdullahi, A.; Shehu, M.
    This study reports the experimental investigation on the suitability of waste glass as partial replacement for fine aggregate in concrete made using Bida natural aggregates (BNA). Glass is widely used in our daily lives through manufactured products such as sheet glass, bottles, glassware, and vacuum tubing. It is an ideal material for recycling. The increasing awareness of glass recycling speeds up inspections on the use of waste glass with different forms in various fields. Mix ratio of 1:2:4 batched by weight with water cement ratio of 0.55 was used. The percentage replacement varied from 0% to 40% at 5% intervals. Slump test was conducted to assess the workability of the fresh concrete. The compressive strengths and densities of cured concrete cubes of sizes 150mm x 150mm x 150mm were evaluated at 7, 21 and 28days. A total of 81 concrete cubes were cast and tested. It was observed that an increase in the percentage replacement of fine aggregate with waste glass reduces workability, density and compressive strength. The compressive strength and density vary with days of curing. The findings of this study indicated that the optimum replacement percentage of waste glass with conventional fine aggregate was 20%. However waste glass can effectively be used as fine aggregate replacement (up to 40%) without substantial change in concrete strength.
  • Item
    Structural Reliability Studies on Pulverized Glass Powder Concrete Subjected to Bending Forces with Natural Aggregate
    (Ethiopian International Journal of Engineering and Technology (EIJET), 2024-02-01) Kolo, D. N.; Aguwa, J. I.; Hadi, A. M.; Shehu, M.; Ashraf, M.L.M.
    The shortage of housing and basic infrastructure in Nigeria is increasing with a continuous rise in the price of construction materials. Cement is a major component in concrete production. Its production, however, is accompanied by huge carbon dioxide emissions. This research presents the results of structural reliability analysis conducted on reinforced concrete beam produced with pulverized glass powder as partial replacement for cement with Natural aggregate (NA) as coarse aggregate by subjecting it to bending forces. First order reliability method (FORM) was employed to determine the level of safety of the beam. The result of the sensitivity analysis showed that the pulverized glass powder beam with NA as coarse aggregate is structurally safe at a span of 3000 mm and depth of 600 mm with probabilities of failure of 1.00 × 10-3 and 1.04 × 10-3 respectively.
  • Item
    A Comparative Analysis of Grillage method and Beam line analysis of a reinforced concrete waffle bridge deck
    (Nigeria Journal of Engineering and Applied Sciences (NJEAS), 2022-01-12) 8. Adamu, H. N.; Abbass, B. A.; Abubakar, M.; Yusuf, A.; Kolo, D. N.; Shehu, M.
    The analysis of reinforced concrete waffle bridge deck using chanchaga bridge as a case study was carried out with the aid of computer program written in MATLAB. The bridge deck which is a beam bridge was idealized to be a waffle slab. A mathematical model of the bridge was developed using the method of grillages because very complex shapes of problem domain with prescribed conditions can be handled easily using the method. The bridge deck was modelled as interconnection of grid elements. The analysis was carried out using direct stiffness matrix method. The nodal displacements and the resulting static internal forces; shear forces, bending moments and twisting moments of each grid element were determined using the matrix. The results obtained using the method of grillages were then compared with beam line analysis and the former method gave a 10% decrease in forces which will result in the reduction of overall design and materials by 10%.