Civil Engineering
Permanent URI for this collectionhttp://197.211.34.35:4000/handle/123456789/148
Civil Engineering
Browse
3 results
Search Results
Item Effect of Partial Replacement of Fine Aggregate with Sawdust in Light Weight Concrete Production Using Bida Natural Stone as Coarse Aggregate(Proceedings of the 3rd International Engineering Conference, Federal University of Technology Minna, Nigeria, 2019) Alhaji, B.; Abubakar, M.; Yusuf, A.; Oritola, S. F.; Mohammed, S.; Kolo D. N.This study investigated the effect of sawdust as partial replacement for Fine Aggregate in light weight concrete production. Sawdust was used to replace Fine Aggregate from 0% to 40% in steps of 5%. 150 x 150 x 150mm concrete cubes were cast for each replacement level, the concrete was cured and the compressive strengths were determined at 7, 21 and 28days curing period respectively. Increase in percentage of sawdust in concrete stant reduction in the compressive strength values with a corresponding reduction in weight. From the result obtained, 5% replacement of Fine Aggregate with sawdust gave a maximum compressive strength 13.11 N/mm2. It was however concluded that the optimum replacement level of 5% can be used as plain concrete for blinding works.Item Probability-Based Calibration of Load Duration Modification Factors for the Nigerian Grown Timber(2023-01-02) Aguwa, J. I.; Sadiku, S.; Afolayan, J. O.; Aliyu, A.; Abubakar, M.; Kolo, D. N.All along, load duration modification factors used in Nigeria for design of timber structures were based on BS 5268 of 2002 and this is not a good engineering practice since the strength of timber depends so much on the soil as well as on the environment. There is the need to localize the modification factors based on our environment since Nigerian grown timber is generally used for all timber structures designed and built in Nigeria. Probability-based calibration of load duration modification factors for the Nigerian grown timber was successfully carried out. The results showed significant difference between the calibrated factors and those from BS 5268 of 2002. The calibrated modification factors are; 1.25 for long-term, 1.35 for medium-term, 1.70 for short term, and 2.0 for very short-term duration. This paper recommends the use of these calibrated load duration factors based on Nigerian grown environment.Item A Comparative Analysis of Grillage method and Beam line analysis of a reinforced concrete waffle bridge deck(Nigeria Journal of Engineering and Applied Sciences (NJEAS), 2022-01-12) 8. Adamu, H. N.; Abbass, B. A.; Abubakar, M.; Yusuf, A.; Kolo, D. N.; Shehu, M.The analysis of reinforced concrete waffle bridge deck using chanchaga bridge as a case study was carried out with the aid of computer program written in MATLAB. The bridge deck which is a beam bridge was idealized to be a waffle slab. A mathematical model of the bridge was developed using the method of grillages because very complex shapes of problem domain with prescribed conditions can be handled easily using the method. The bridge deck was modelled as interconnection of grid elements. The analysis was carried out using direct stiffness matrix method. The nodal displacements and the resulting static internal forces; shear forces, bending moments and twisting moments of each grid element were determined using the matrix. The results obtained using the method of grillages were then compared with beam line analysis and the former method gave a 10% decrease in forces which will result in the reduction of overall design and materials by 10%.