Physics
Permanent URI for this collectionhttp://197.211.34.35:4000/handle/123456789/98
Physics
Browse
5 results
Search Results
Item HARVESTING RENEWABLE ENERGY FOR A SUSTAINABLE FUTURE USING QUANTUM DOT TECHNOLOGY(13th annual and international hybrid conference of the renewable and alternative energy of nigeria, 2025-03) Ikeri, H.I; Ndubueze, D. N; Eze, C. N.; Achuka, E. I; Nwagbara, O.; Onuabuchi, V. CThis paper explores the role of quantum dots in revolutionizing renewable energy technologies, addressing challenges such as stability and environmental impact. Renewable energy is essential for a sustainable future and advancements in nanotechnology have opened new possibilities for efficient energy harvesting. The result obtained indicates that quantum dots (QDs), display tunable electronic properties, discrete electronic state and high photon absorption efficiency. The novel properties allow for new design architectures such as immediate band, multiple exciton generation and multiple junction solar cell technologies. These mechanics have shown to derive quantitative gains in the solar to electricity conversion efficiency to surpass the Shockley and Quisser limit imposed on conventional cells. By integrating QD-based systems with solar photovoltaics and next generation batteries would paves the way for more efficient and sustainable energy solutions.Item Synthesis and Characterization of Chemically Deposited Doped Stannate Ternary Metal Oxide Thin Films and Their Solar Energy Applications(4th Africa Nano Conference and Workshop, 2021-07) Eze, C. N.; Onyia, A. I; Nnabuchi, M. NNano structured ternary metal oxide thin film like ZnSnO4 have receive much attention in the last decades owing to their unique properties rendering them suitable for wide range of applications. ZnSnO4 were grown by the chemical spray pyrolysis method. Home made spray pyrolysis technique is employed to prepared thin films. ZnSnO4 film was deposited on glas substrate using aqueous solution of zinc acetate dehydrate (Zn (CH3COO)2.2H2O and Tin (11) Chloride dehydrate or Stanic Chloride pentahydrate, SnCl2.5H2O as precursor at temperature of 2000C. the concentration of Zinc was varied from 0.001 to 0.005 while that of Tin was at 0.5. The product was annealed at 1hr at 2000C to improve its crystallinity. Various investigative techniques like XRD, SEM, EDX, UV-Visible, Raman spectroscopy analysis were carried out to find out the structural, morphological, spectroscopic and other properties of the ternary oxide thin film. The synthesized ZnSnO4 is of average crystalline size nano flowered having transmittance which increases with increase in wavelength. It has various band gaps which makes it find its application in photocatalysis and DSSCs (photoanode).SelfItem Electrode Materials for Energy Storage and Conversion(Tailor and Francis, 2022) Eze, C. N.; Obodo, R. M; Ezema, F. I; Kebede, M. AAlkaline earth stannates are rare earths and are crucial material systems evident of their attractive physical properties. They are ternary metal oxide semiconductors.They have both perovskite structures (BaSnO3, SrSnO3) and spinel structures(ZnSnO4).They are compounds of tin (Sn). Broadly, these compoundsexhibit elevated melting-points, elevated thermal stability, great thermal expansion coefficient, excellent chemical resistance, small thermal conductivity and great ionic conductivity which guarantee their possible applicacability in thermal barrier coating, hosts for luminescence centers, hosts for nuclear wastes, oxygen monitoring sensors, high-temperature catalysts, solar cells applicability and solid electrolytes in large temperature fuel cells. When these materials are produced as nanoparticles, the decreased particle size as well as enlarged specific surface area could result in diverse phase transition temperatures, improved catalytic activity, and enhanced processability. Commonly, these rare earth complex oxide nanomaterialscould be fabricated via conventional solid-state reactions, coprecipitation, sol-gel, hydrothermal, self-propagation techniques, etc.In the background of energy crisis, climate change, long-term supply and security, solar energy is a striking source. For these stannates to be better utilized in solar energy harvesting applications, they are better doped.The stannates considered here are SrSnO3, BaSnO3 and ZnSnO4.The doped stannates are used in various ways as stated above and equally as transparent conductors, light absorbers, photoanodes, etc. This is in relation to optical properties.The Optical properties, structural order and surface properties of these materials are considered. On doping, thesestannates maintain excellent transparency which makes them excellent materials as transparent conductor particularlyZnSnO4. They are found highly useful in photocatalysis and other areas.In solar energy harvesting, solar energy harvesting devices could have a better output when nanostructures like doped stannates are incorporated in them. Such advance is hopeful. It improves the power conversion efficiencies (PCE) of such devices by utilizing new nanostructures to update device structural designs. This is an applauded process.Item A STUDY OF CHEMICALLY DEPOSITED OXIDE- BASED TERNARY THIN FILM OF ZINC TITANATE (ZnTiO3) DOPED WITH NATURAL DYES AND THEIR POTENTIAL PHOTOVOLTAIC APPLICATIONS.(journal of nano and material science research, 2025) Eze, C. N.The ternary metal oxide thin film of ZnTiO3 doped with three different natural dyes were synthesized on glass substrate via solution growth (SG) at room temperature. Chemical baths were used which contained Zinc Sulphate (ZnSO4.7H2O), Sodium Hydroxide (NaOH), Titanium Chloride (TiCl3), distilled water and calibrated drops per bath of organic dyes: Lawsonia inermis, Beta vulgaries and Jatropha curcas respectively. Each deposit which was set at a temperature of 80 0C lasted for 1 h and each deposit was annealed at 400 0C for 1 h. These deposited nano thin films were characterized for their structural, morphological, optical properties, elemental composition and electronic (chemical) structure and presence of functional groups by means of X-ray diffraction (XRD), Scanning Electron Microscope (SEM), UV-VIS spectrophotometer, Energy Dispersive X-ray Fluoroscopy (EDXRF) and photoluminescence Fourier Transform Infrared Radiation Spectroscopy (FTIR). Polycrystalline thin films were evidenced which marked porosity offered them maximum surface area for dye loading which is critical for photosensitization in dye sensitized solar cells (DSSCs). Such doping presented band gaps of doped ZnTiO3 from 1.84 eV to 3.45 eV depending on dopants applied as against undoped film band gap that was 3.55 eV. The FTIR results showed good photophysical, carboxylate and modification properties of the dyes which helps in sunlight harvesting, anchoring and surface structure modification of the films. The dye influenced the optical properties of the samples and in particular, the reduction of the energy band gap, Eg from an increase in absorption coefficient α, giving high absorbance A, low extinction coefficient k, low reflectance R, which inferred its potential applications in solar energy devices when used in construction, poultry houses, solar cells and DSSCs.Item Optical Properties of PbSe, PbS, and PbTe Semiconductor Quantum Dots and their Applications(2025-08) Ikeri, H.I; Harry, S.T; Achuka, E.I; Eze, C. N.; Asielue, O.K; Ndubueze, N.DAbstract - Optical properties of PbSe, PbS, and PbTe semiconductors in confinement regimes have been studied using the Brus equation. The results indicate that QDs exhibit size-dependent optical behavior and, hence, tunable bandgaps and emission wavelengths as a consequence of quantum confinement. As the QD size decreases, the absorption edge and emission peak are blue-shifted for all three materials. It is found that PbSe QDs display significant quantum confinement even at larger sizes. Due to its relatively large exciton Bohr radius (~46 nm), as the size decreases from 10 nm to 2 nm, the bandgap increases from 0.27 eV to over 1 eV, shifting absorption and emission into the near-infrared (NIR), leading to applications into NIR photodetectors, solar cells, and biomedical imaging. Also, PbS QDs exhibit significant quantum confinement effects at smaller sizes due to their smaller exciton Bohr radius (~20 nm) compared to PbSe. The bandgap increases from 0.41 eV to around 1.5 eV as the size decreases from 10 nm to 2 nm, shifting absorption and emission from the NIR into the visible range. This is utilized in solar cells, visible to NIR photodetectors and LEDs. Furthermore, PbTe QDs also exhibit pronounced quantum confinement effects because of their relatively large exciton Bohr radius (~46 nm). The bandgap increases from 0.32 eV to around 1 eV as the size decreases from 10 nm to 2 nm, shifting absorption and emission into the NIR and Mid-Infrared (MIR) regions, making them excellent materials for infrared detectors, thermoelectric and MIR applications. Among the semiconductor materials studied, PbS QD typically exhibits the largest increase in bandgap with decreasing size, making them suitable for applications requiring larger bandgap tunability, followed by PbSe and PbTe. These different optical characteristics are due to their unique electronic properties and exciton Bohr radii.